API 5L Pipe
Quality Forge is a leading manufacturer of high-quality API 5L Pipes. API 5L pipes consist of covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. API 5L pipes are suitable for conveying Gas, Oil and Water. API 5L are used in both Oil and Gas industries. Qualty Forge is India's one of the largest stock holders of the API 5L.
We supply and export API 5L pipes all over the world to the Gas and Oil industries. With so many years of experience and trust of our clients we can identify the product needs of the clients and achieve the demands. Quality Forge is a ISO 9001 certified company.
Chemical Composition of API 5L PSL1 Seamless Pipe:
|
Mass fraction, based upon heat and product analysis a |
||||||
|
SEAMLESS PIPE |
||||||
|
C |
Mn |
P |
V |
Nb |
Ti |
|
|
Maxb |
maxb |
max. |
max. |
max. |
max. |
max. |
|
0.28 |
1.20 |
0.030 |
0.030 |
c,d |
c,d |
d |
|
WELDED PIPE |
||||||
|
0.26 |
1.20 |
0.030 |
0.030 |
c,d |
c,d |
d |
Mechanical properties of API 5L PSL1 Pipe
|
Y.S |
T.S |
ELONGATION |
|
Mpa(psi) |
Mpa(psi) |
|
|
Min |
min |
min |
|
360 (52 200) |
460 (66 700) |
28% |
- 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
- For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65%
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06%.
- The sum of the niobium ,vanadium and titanium concentratons shall be ≤0.06%.
- Unless otheriwse agreed.
- Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Pipe grades, Steel grades and acceptable delivery conditions:
|
PSL |
Delivery conditions for API 5L X52 PSL1 Pipe |
Steel grade |
|
PSL 1 |
As rolled, normalizing rolled, thermomechanical rolled / formed, normalizing formed, normalized and tempered; if agreed, quenched and tempered for SMLS pipe only |
B |
|
As rolled, normalizing rolled, thermomechanical rolled / formed, normalizing formed, normalized and tempered or quenched and tempered |
X42 |
|
|
X46 |
||
|
X52 |
||
|
X56 |
||
|
X60 |
||
|
X65 |
||
|
X70 |
||
|
PSL 2 |
As rolled |
BR |
|
Normalizing rolled / formed, normalized, normalized and tempered |
BN |
|
|
Quenched and tempered |
BQ |
Chemical composition for API 5L PSL1 Pipe with T ≤ 25.0mm
|
Steel grade |
C max |
Mn max |
P S max |
V max |
Nb max |
Ti max |
|
Seamless pipe |
||||||
|
B |
0.28 |
1.20 |
0.030 |
c,d |
c,d |
d |
|
X42 |
0.28 |
1.30 |
0.030 |
d |
d |
d |
|
X46 |
0.28 |
1.40 |
0.030 |
d |
d |
d |
|
X52 |
0.28 |
1.40 |
0.030 |
d |
d |
d |
|
X56 |
0.28 |
1.40 |
0.030 |
d |
d |
d |
|
X60 |
0.28 |
1.40 |
0.030 |
f |
f |
f |
|
X65 |
0.28 |
1.40 |
0.030 |
f |
f |
f |
|
X70 |
0.28 |
1.40 |
0.030 |
f |
f |
f |
|
c Nb+V≤0.06%, d Nb+V+Ti≤0.15%, f Unless otherwise agreed, Nb+V+Ti≤0.15% |
Requirements for the results of tensile tests for PSL2 pipe
|
Pipe grade |
Pipe body of seamless and welded pipes |
||
|
Yield strength |
Tensile strength |
Elongation |
|
|
MPa (psi) min |
MPa (psi) min |
% min |
|
|
B |
245(35 500) |
415(60 200) |
c |
|
X42 |
290(42 100) |
415(60 200) |
c |
|
X46 |
320(46 400) |
435(63 100) |
c |
|
X52 |
360(52 200) |
460(66 700) |
c |
|
X56 |
390(56 600) |
490(71 100) |
c |
|
X60 |
415(60 200) |
520(75 400) |
c |
|
X65 |
450(65 300) |
535(77 600) |
c |
|
X70 |
485(70 300) |
570(82 700) |
c |
|
c The specified minimum elongation, Af1 shall be as determined using the equation as described in Specification |
|||
Carbon Steel Pipes and Tubes Products
A53 A106 API5L Grade B/C X42 Seamless Pipe
Size Range : 1/8" - 26"
Schedules : 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH
Grades : ASTM A53 Gr B, ASME SA53 Gr B, API-5L Gr B, ASTM A106 Gr B, ASME SA106 Gr B, ASTM A106 Gr C, PSL 1 and PSL2
API5L X-42 X-52 X-60 Seamless Pipe
Size Range
: 2" - 24"
Schedules
: Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH
Grades
: PSL1 and PSL2
A333 (Low Temp) Grade 1/6 Carbon Steel Seamless Pipe
Size Range
: 1/2" - 24"
Schedules
: Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH
A53 API5L Grade B X-42 X-52 X-60 ERW (Electric Resistance Welded) Pipe
Size Ranges
: 2" - 24"
Schedules
: 10, 20, Standard (STD), Extra Heavy (XH)
Non-Schedules
: .120wall, .156wall, .188wall, .203 wall, .219wall etc.
Grades
: API-5L Gr B, API-5L Gr X42, API-5L Gr X52, API 5L X56, API-5L Gr X60,
API-5L Gr X65, API 5L X70 PSL1 and PSL2
API5L Grade B X-42 X-52 X-60 DSAW/SAW
Size Ranges
: 26" - 60"
Schedules
: 20, Std, XH, 30,
Grades
: API-5L Gr B, API-5L Gr X42, API-5L Gr X52, API 5L X56, API-5L Gr X60,
API-5L Gr X65, API 5L X70 PSL1 and PSL2 Certified and Tesed NACE MR0175,
NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, PWHT
etc.
Sizes (Seamless)
: 1/2" NB - 60" NB
Sizes (ERW)
: 1/2" NB - 24" NB
Sizes (SAW)
: 16" NB - 100" NB Material Grades
Wall Thickness available:
Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk
|
High Temperature Seamless Pipe |
ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B |
|
Heat Exchanger Seamless Tube |
ASTM A179 |
|
Low Temperature Seamless Pipe |
ASTM A333 Gr. 3/6 |
|
Low Temperature Seamless Tube |
ASTM A334 Gr. 6 |
|
High Yield Seamless Pipe |
API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2 |
|
High Yield Seamless Pipe |
ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485 |
|
Atmospheric & Low Temp EFW Pipes |
ASTM A671 Gr. CC60/CC65/CC70 |
|
High Pressure & Moderate Temp EFW Pipes |
ASTM A672 Gr. B60/B65/B70/C55/C60/C65/C70 |
|
High Yield ERW/SAW Pipe |
API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2 |
|
High Yield ERW/SAW Pipe |
ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485 |
Dimensions for API 5L PSL1 Seamless Pipe:
All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.
API 5L Carbon Steel Seamless Pipes Types
Contact us
Products
- ANSI B16.5 Forged Flanges
- ANSI B16.1 Industry Standard
- AWWA C207 Flanges
- Alternate Flange Facings
- ANSI B16.5 -½ "-24" Forged Flanges
- Bolt and Stud Dimensions - ASME B16.5 Flanges
- ANSI B16.47 Series A Flanges
- Long Weld Neck Standard Connection Flanges
- Long Weld Neck Standard Connection Flanges
- Flange Wall Thickness
- Long Weld Neck Standard Connection Flanges
- ANSI B16.47 Series B Flanges
- Weld Neck Flange Bores
Saudi Arabia
Qatar
Oman
Kuwait
Bahrain
UAE
Mexico
Canada
United States
South Africa
Singapore
Malaysia
Sri Lanka
Australia
Brazil
Venezuela
Bangladesh
Turkey
Netherlands
United Kingdom
Iran
Nigeria
About Company
Quick Links
Products
Contacts
- 192/4, Pavapuri Appartment, 9th Street, Girgaon, Mumbai - 400 004, Maharashtra, India.
- qualityforge@gmail.com
- info@qualityforge.net
- +91 22 6639 4542
- +91 9619 352 777